PALO 35 and 3.5"Screen

Sep 17, 2012 at 5:12 PM


i m trying to load windowsCE from the sd card but the boot fails

VFS_InitConstraint: opmCurrent=4, opmCeiling=4, opmFloor=0frequency=300, floor=0, ceiling=100
frequency=300, floor=100, ceiling=250
frequency=600, floor=250, ceiling=500
frequency=800, floor=500, ceiling=700
frequency=1000, floor=700, ceiling=1000
ECC TYPE is BCH 8 bit
ECC_Init: unsupported ecc mode:255
SetOpp to 2
SetOpp to 1
VDD1 1.1000V

I wonder if there is something else to try

Thank you in advance for your help


Sep 18, 2012 at 3:41 AM

Are you using the CE 6 or the WEC 7 image?

The CE 6 image can be flashed but the WEC 7 image is uSD card based only (but with the full BSP you can generate eather).

If I had to guess it looks like you tried to flash the uSD image.





Sep 18, 2012 at 7:47 AM


I downloaded the file and i am trying, according to your instructions to run windows from the SD card NOT to flash it to nand.


Thank you


Sep 18, 2012 at 3:05 PM

Did you download the CE 6 or the WEC 7 image?

What COM module are you using?

When did you purchase it?

Sep 18, 2012 at 3:55 PM



i purchased it a few days ago and i have in the sd card the follow files.




I downloaded (tnink this is the only download) the Gumstix Overo CE6

Thank you


Sep 20, 2012 at 7:31 AM



is the problem the processor which is "Texas Instruments DM3730 DaVinci Digital Video Processor"?



Sep 20, 2012 at 1:39 PM

Thats probably it. The demo image was developed before Gumstix released the DM3730 module. It was developed for the 3530 with the older 256meg Flash/RAM.

The BSP source does support all the new modules and Flash combonations (DM3730 IronStorm and the 512M RAM/Flash).